Public beta — temporary labs may change or be reset.

Setup guides

Point your tool at a lab device

Pick your monitoring tool and follow the steps to poll a temporary lab device over SNMP v2c and watch the fault scenarios fire. Each guide mirrors the exact configuration we validated.

Before you start (any tool)

  1. In the lab, create a Router (generic-router-v1) and copy its Host, Port, SNMP version and Community.
  2. Host is snmp-test.bonguides.com, port 161, SNMP v2c. The community is generated per device — treat it as a throwaway secret.
  3. Expect 8 interfaces (GigabitEthernet0/1–8), plus system uptime, CPU and memory over standard MIBs.
Start Free LabCompatibility results